Show Tech Pro Blade SS Snap-On Comb – 38mm

These extra stainless-steel snap-on comb 38mm for the snap on blade #30. it helps you work even faster and give a smooth finish to all coat types.
Time is money! By using the snap-on combs, you can save a lot of time and work much more efficiently. With these, you can work even faster and clip more than with the traditional ones. The combs allow you to play with different lengths, create the style you want and make your work a lot easier and faster compared to scissoring only. Because each length of the Show Tech attachment comb has a different color, you can change it quickly and efficiently.
Moreover, by working with snap-on combs, your fingers and wrists will be spared a lot more, which results in less physical complaints.

The Show Tech snap on combs fit on every snap on blade #30, from every brand Show Tech, Heiniger, Wahl Andis, Oster, Aesculap etc.

Use instructions
The combs have 2 hooks on the back. Simply click them on the back part of your blade and pull forwards. The spring will allow you to snap the comb over the blade. Thanks to the front ledge in the snap-on comb, the side guard and the 2 hooks at the back, the blade is now totally secured on all 4 sides and will not snap off.
To remove the snap-on comb from the blade, gently push it in a forward position until the spring allows the blade to pass the front ledge (don’t bend or try to pull).
Always use the snap-on combs on well-washed, blow-dried and brushed coats. They can be used on any curly coat (such as a Poodle, Bichon Frise) or silky coat (Maltese, Shih Tzu, York Terrier) and when speed and commercial efficiency are your priorities.
Choose your desired length of snap-on comb and using gentle strokes, style the coat in either the direction of the coat growth or against it. Comb the coat, repeat this process, then comb again and scissor the coat for a perfect finish.
The combs can be used with or against the coat growth depending of the coat type. You can achieve an excellent and sometimes even better finish clipping against the coat growth. Keep in mind that clipping in the opposite direction of the coat growth can result in a shorter finish, so start with using a slightly longer snap-on comb.

Caution: Never use a size #40 or #50 blade on these snap-on combs. These types of blades are narrower, causing the teeth from the comb to get stuck in the blade and thus breaking the teeth of your blade.